This will change settings for expansion cards such as RTG, Network, and SCSI cards.

RTG Graphics Card Settings
- RTG Memory is for graphics card use such
as the Picasso96 Retargetable Graphics system so that you can use your PC's
graphics card rather than the custom chips for extra speed. Upto 512 MB
- Match host and RTG color depth if possible Color space conversion
enabled.
- Scale if smaller than display size setting Rescale display if
current window is smaller than the display size setting given
- Always scale in windowed mode Rescale display instead if using
windowed mode.
- Color formats can be changed on the pull down menus for 15/16/24/32
bit color depts. See number of bits after each RGB value to change format.
Note, if the RTG area is greyed out, change the CPU to a higher and faster
processor such as 68020 or better.
- Refresh Rate This can be Disabled, Chipset, Real or 50, 60, 70 or 75 Hz.
- Aspect Ratio This can be Disabled, Automatic, 4:3, 5:4, 15:9, 16:9, 16:10.
Miscellaneous Expansions
- Catweasel Z2 emulation Emulates the Catweasel floppy disk controller using Zorro 2 slot (moved from Misc in v2.0)
- uaescsi.device Adds support for IDE/SCSI
CDROM drives on Amiga side. Use this device name in your CD0 DosDriver file
in Devs\DosDrivers, and add the appropiate unit number (use Create Log file
to see which unit number your CD drive uses).
First CDROM is always uaescsi.device unit zero, second is zero etc.. and
then other non-CDROM SCSI devices (moved from Misc in v2.0).
Network
- bsdsocket.library Allows your
Amiga to use your PC's network connection, whether it be through Dial-Up
Networking (DUN), or Ethernet connectivity. In other words, if your PC is
connected to your Internet Service Provider (ISP) through a modem, or connected
to a LAN through an Ethernet connection, your Amiga will be able to make
use of that connection (moved from Misc in v2.0).
- uaenet.device Enable SANA2 compatible net device. Requires WinPCap (Windows Packet Capture Library) (moved from Misc in v2.0).
- A2065 Z2 Emulates the A2065 Zorro 2 card. Option below is 'Cable Disconnected'.